Moderators: EDS50, cgrey8, 2Shaker, Jon 94GT
Anyone else on Facebook?
Just wondering if anyone was on Facebook, I am trying to add as many Friends as possible that either have Fords, Race, Tune, or are just Gear-heads to my Car's Facebook page. Anyone insterested pleas login and send me a request:
http://www.facebook.com/N1K5T4NG#!/
http://www.facebook.com/N1K5T4NG#!/
LEXKY
Strategy: CBAZA - Custom
302:5-Speed, stock heads cam and compression:
1.72 ratio rockers, F5DE-B5A - 24lb Injectors, 255 Walbro, 70mm - BBK T/B, GT-40P Intake, Summit 'Shorties' Headers, BBK X-pipe, FlowTech Terminators w/ MAC Tails [rest of plumbing is custom 2½ SS] , Smog delete Pulley, | Trac-Loc[3.73] gears, E7 Heads
MODS:http://www.gonzomotorsports.com/?page_id=236
Strategy: CBAZA - Custom
302:5-Speed, stock heads cam and compression:
1.72 ratio rockers, F5DE-B5A - 24lb Injectors, 255 Walbro, 70mm - BBK T/B, GT-40P Intake, Summit 'Shorties' Headers, BBK X-pipe, FlowTech Terminators w/ MAC Tails [rest of plumbing is custom 2½ SS] , Smog delete Pulley, | Trac-Loc[3.73] gears, E7 Heads
MODS:http://www.gonzomotorsports.com/?page_id=236
Re: Anyone else on Facebook?
come on now I have created a EEC Tuning group; some of you have to be on facebook...
LEXKY
Strategy: CBAZA - Custom
302:5-Speed, stock heads cam and compression:
1.72 ratio rockers, F5DE-B5A - 24lb Injectors, 255 Walbro, 70mm - BBK T/B, GT-40P Intake, Summit 'Shorties' Headers, BBK X-pipe, FlowTech Terminators w/ MAC Tails [rest of plumbing is custom 2½ SS] , Smog delete Pulley, | Trac-Loc[3.73] gears, E7 Heads
MODS:http://www.gonzomotorsports.com/?page_id=236
Strategy: CBAZA - Custom
302:5-Speed, stock heads cam and compression:
1.72 ratio rockers, F5DE-B5A - 24lb Injectors, 255 Walbro, 70mm - BBK T/B, GT-40P Intake, Summit 'Shorties' Headers, BBK X-pipe, FlowTech Terminators w/ MAC Tails [rest of plumbing is custom 2½ SS] , Smog delete Pulley, | Trac-Loc[3.73] gears, E7 Heads
MODS:http://www.gonzomotorsports.com/?page_id=236
- cgrey8
- Administrator
- Posts: 11304
- Joined: Fri Jun 24, 2005 5:54 am
- Location: Acworth, Ga (Metro Atlanta)
- Contact:
Re: Anyone else on Facebook?
What's the group name?
I searched for EEC Tuning and didn't find anything with that exact name. There were some variants, but too many for me to go looking through.
I searched for EEC Tuning and didn't find anything with that exact name. There were some variants, but too many for me to go looking through.
...Always Somethin'
89 Ranger Supercab, 331 w/GT40p heads, ported Explorer lower, Crane Powermax 2020 cam, FMS Explorer (GT40p) headers, aftermarket T5 'Z-Spec', GUFB, Moates QuarterHorse tuned using BE&EA
Member V8-Ranger.com
89 Ranger Supercab, 331 w/GT40p heads, ported Explorer lower, Crane Powermax 2020 cam, FMS Explorer (GT40p) headers, aftermarket T5 'Z-Spec', GUFB, Moates QuarterHorse tuned using BE&EA
Member V8-Ranger.com
- My427stang
- Regular
- Posts: 135
- Joined: Mon Jun 07, 2010 8:04 am
- Location: Omaha, NE
- Contact:
Re: Anyone else on Facebook?
Same here, and for some reason, your link brings me to my page LOL
70 Sportsroof, 427 FE, 489 cid, 10.7:1, KC ported Edelbrock heads, modified Massflo EFI, 45 lb injectors, 34 inch long tubes, A9L w/QH, Erson E240322 camshaft, TKO-600, 31 spline 4.11, A/C.
71 F100 4x4 shortbed 390 with all the goodies
08 F250 Powerstroke 4x4 XLT crew cab
07 HD Street Glide, Black, 96 cid 6 speed EFI
71 F100 4x4 shortbed 390 with all the goodies
08 F250 Powerstroke 4x4 XLT crew cab
07 HD Street Glide, Black, 96 cid 6 speed EFI
Re: Anyone else on Facebook?
LEXKY
Strategy: CBAZA - Custom
302:5-Speed, stock heads cam and compression:
1.72 ratio rockers, F5DE-B5A - 24lb Injectors, 255 Walbro, 70mm - BBK T/B, GT-40P Intake, Summit 'Shorties' Headers, BBK X-pipe, FlowTech Terminators w/ MAC Tails [rest of plumbing is custom 2½ SS] , Smog delete Pulley, | Trac-Loc[3.73] gears, E7 Heads
MODS:http://www.gonzomotorsports.com/?page_id=236
Strategy: CBAZA - Custom
302:5-Speed, stock heads cam and compression:
1.72 ratio rockers, F5DE-B5A - 24lb Injectors, 255 Walbro, 70mm - BBK T/B, GT-40P Intake, Summit 'Shorties' Headers, BBK X-pipe, FlowTech Terminators w/ MAC Tails [rest of plumbing is custom 2½ SS] , Smog delete Pulley, | Trac-Loc[3.73] gears, E7 Heads
MODS:http://www.gonzomotorsports.com/?page_id=236
-
Chucko
- Tuning Addict
- Posts: 611
- Joined: Tue Nov 04, 2003 11:42 pm
- Location: Silicon Valley, CA, USA
- Contact:
Re: Anyone else on Facebook?
Like I need more distractions on FB... I requested to join. 
'89 LX 5.0, Crane 2040, Pro-M 75mm Bullet, 65 mm TB, ported stock intake & E7TE heads, 24 lb injs., JBA shortys, cat X-pipe, A3M1 (GUFB strategy) w/Moates Quarterhorse, BE & EA, close ratio T5Z, 3.55 rear
-
dualdj1
- Tuning Addict
- Posts: 627
- Joined: Thu Feb 19, 2009 3:04 pm
- Location: East Peoria, IL
- Contact:
Re: Anyone else on Facebook?
Same here
1978 Mustang II King Cobra
89 5.0HO, Stock Short Block, Edelbrock 4bbl aluminum intake, Holley 650 double pumper, MSD 6AL, Ford F303 cam, 1.7:1 Crane Roller Rockers, Pocket Ported stock heads, Hedman Long Tube Headers
5 spd Manual
Full roll cage, 9" full floater w/Currie trac lock/373 gears, RCI Fuel Cell
Project Page: http://www.brandttuning.com/projects.htm
89 5.0HO, Stock Short Block, Edelbrock 4bbl aluminum intake, Holley 650 double pumper, MSD 6AL, Ford F303 cam, 1.7:1 Crane Roller Rockers, Pocket Ported stock heads, Hedman Long Tube Headers
5 spd Manual
Full roll cage, 9" full floater w/Currie trac lock/373 gears, RCI Fuel Cell
Project Page: http://www.brandttuning.com/projects.htm
Re: Anyone else on Facebook?
Thanks for joining up. I hope to make the group grow and be as useful as this site is. Hopefully just another great place to find good information and friendly people.
LEXKY
Strategy: CBAZA - Custom
302:5-Speed, stock heads cam and compression:
1.72 ratio rockers, F5DE-B5A - 24lb Injectors, 255 Walbro, 70mm - BBK T/B, GT-40P Intake, Summit 'Shorties' Headers, BBK X-pipe, FlowTech Terminators w/ MAC Tails [rest of plumbing is custom 2½ SS] , Smog delete Pulley, | Trac-Loc[3.73] gears, E7 Heads
MODS:http://www.gonzomotorsports.com/?page_id=236
Strategy: CBAZA - Custom
302:5-Speed, stock heads cam and compression:
1.72 ratio rockers, F5DE-B5A - 24lb Injectors, 255 Walbro, 70mm - BBK T/B, GT-40P Intake, Summit 'Shorties' Headers, BBK X-pipe, FlowTech Terminators w/ MAC Tails [rest of plumbing is custom 2½ SS] , Smog delete Pulley, | Trac-Loc[3.73] gears, E7 Heads
MODS:http://www.gonzomotorsports.com/?page_id=236
Re: Anyone else on Facebook?
Also requesting from Finland 
Ford Mustang Cobra -94. Focus ST 2013
Coretuning/Moates/HPTuners/Innovate/Tunernerd Knock Monitor/
Coretuning/Moates/HPTuners/Innovate/Tunernerd Knock Monitor/
-
jetenginedoctor
- Regular
- Posts: 74
- Joined: Sat Apr 25, 2009 10:32 pm
- Location: Austin, TX
- Contact:
Re: Anyone else on Facebook?
Thanks again to all who have joined up. Let's get it bigger and more active. I would love to see projects that are in progress and ones that are still in planning/brainstorming process. I really enjoy this forum and use it quite often, but it is sometimes hard to find the information that I am in need of right at the moment I search for it. Usually I can post and get a reply within a day or so, but I figure incorporating the forum with FB we would have more resources to use for communicating and relaying information to one another. This would also provide an easy way to work on problems and find solutions as a collective.
If anyone has a conflict with this group please let me know and I will do my best to remedy what needs resolving.
If anyone has a conflict with this group please let me know and I will do my best to remedy what needs resolving.
LEXKY
Strategy: CBAZA - Custom
302:5-Speed, stock heads cam and compression:
1.72 ratio rockers, F5DE-B5A - 24lb Injectors, 255 Walbro, 70mm - BBK T/B, GT-40P Intake, Summit 'Shorties' Headers, BBK X-pipe, FlowTech Terminators w/ MAC Tails [rest of plumbing is custom 2½ SS] , Smog delete Pulley, | Trac-Loc[3.73] gears, E7 Heads
MODS:http://www.gonzomotorsports.com/?page_id=236
Strategy: CBAZA - Custom
302:5-Speed, stock heads cam and compression:
1.72 ratio rockers, F5DE-B5A - 24lb Injectors, 255 Walbro, 70mm - BBK T/B, GT-40P Intake, Summit 'Shorties' Headers, BBK X-pipe, FlowTech Terminators w/ MAC Tails [rest of plumbing is custom 2½ SS] , Smog delete Pulley, | Trac-Loc[3.73] gears, E7 Heads
MODS:http://www.gonzomotorsports.com/?page_id=236
Re: Anyone else on Facebook?
just requested tonight
88 GT - D.S.S 331 - Holley SysteMAX II upper & lower - 05+ Slot Style MAF - Underdrives - 70mm Throttle Body - Comp Cam XE274HR - MAC LongTubes - 30lbs Injectors - 255lph Fuel Pump - MSD 6AL - 4:10's - 31 Spline -Tremec T-5 -TwEECer RT- BE & ECC Analyzer - A9S
Who is online
Users browsing this forum: No registered users and 7 guests