Moderators: EDS50, cgrey8, 2Shaker, Jon 94GT
Anyone in the Houston area?
I have been playing with the Tweecer for a little over 2 months now and I am still having a hard time getting a good tune together. I think it would be a lot better if I could get some hands on with someone in the know. I have been reading posts and abusing the search function, and as I write this I have 8 internet explorer windows opened to eectuning.org on different posts trying to learn. I go to school Mon-Fri 1-6 pm, and work on the weekends so I don't have near as much time as I would like. If there is anyone in the Houston area that would be willing to shed some light for a new guy it would really help me out, this site has been great in helping me start to "get it", but almost every post I have tried to learn from ends abruptly and with no conclusion. I'm not lazy or looking for someone to write my tune for me, I just need some help and I learn better by doing something then I do by reading about doing something. I can pay to make it worth your time if necessary, Thanks for any help -Chris
92' LX, GUFB, A9L, Tweecer R/T, BE & EA, LC-1, 331, 10.5:1, AFR 185's (mild port work), Edelbrock RPM II (lots of port work), PRO-M 77mm (30 lbs cal), FRPP 30 lb/hr red top injectors, Accufab 75mm, 227/233 @ .050 .576"/.560" camshaft, 1 3/4" BBK LT's - Best E.T. 11.80's @ 118 untuned, prior to port work...
Re: Anyone in the Houston area?
Also, this is my daily driver.
92' LX, GUFB, A9L, Tweecer R/T, BE & EA, LC-1, 331, 10.5:1, AFR 185's (mild port work), Edelbrock RPM II (lots of port work), PRO-M 77mm (30 lbs cal), FRPP 30 lb/hr red top injectors, Accufab 75mm, 227/233 @ .050 .576"/.560" camshaft, 1 3/4" BBK LT's - Best E.T. 11.80's @ 118 untuned, prior to port work...
Who is online
Users browsing this forum: No registered users and 12 guests