Thermactor present error

cbrown9064 · Post by **cbrown9064** » Sat Mar 14, 2015 7:50 am

I am using Derek's CDAN4 strategy, and when I use a calibration I get an error on Thermactor present. In the base LLX3 it is a yes/no and in the BIN I am working on it is a 1/0. Seems simple enough, but I try to input a 1 or 0 and it errors and says "must be numerical".

What the heck. I tried yes/no, but that gives "must be numerical" also.

Any ideas on how to get this one working?

decipha · Post by **decipha** » Sat Mar 14, 2015 12:58 pm

I just tuned a 96 cobra this morning with dereks latest cdan4 and I didnt have any issues

post the beb and ill take a look

cbrown9064 · Post by **cbrown9064** » Mon Mar 16, 2015 11:22 am

I got it...a BE to user error (in other words I didn't understand what the program was telling me).

So a "2" was an invalid number. It needed to be either 1 or 0. I thought when I would change it to 1 or 0 the error would go away instantly when looking at the PID. Not the way BE works.

If I changed the value to a 1 or 0, then saved the calibration and reopened it, the error was gone and it was back to a "yes" "no" type of response. I set it to be what I wanted, saved it back again. Reopened and then uploaded to the QH. All is well now...

CB

mJacobsenst · Post by **mJacobsenst** » Mon Mar 16, 2015 5:23 pm

Call me and Ill help get it going.

Bob
573 747-6523

cbrown9064 · Post by **cbrown9064** » Mon Mar 16, 2015 11:45 pm

mJacobsenst wrote:Call me and Ill help get it going.

Bob
573 747-6523

Thanks Bob! I got it "figured" out. User error on my end...

Chris

Thermactor present error

Re: Thermactor present error

Re: Thermactor present error

Thermactor present error

Re: Thermactor present error

Who is online