Datalogging is not fast enough? - Page 2

93notch · Post by **93notch** » Sat May 08, 2004 7:13 pm

tms217 wrote:I dont have another... I'll see if I can find someone that will let me use theirs...

Here are somemore #'s at WOT.. You can see an almost 1 full second it skips during it..

126.943
127.784
128.205

Which Strategy are you using with your Cobra? Can you send me a 4 bank copy of your stock binary??

wkstill · Post by **wkstill** » Mon May 10, 2004 6:47 pm

Did you try changing you PC color depth ?

try 16bit, 24bit, 32bit as well, i noticed it would make a diff sometimes on refresh speed.

shonut · Post by **shonut** » Mon May 10, 2004 7:00 pm

wkstill wrote:Did you try changing you PC color depth ?

try 16bit, 24bit, 32bit as well, i noticed it would make a diff sometimes on refresh speed.

note that the speed is not always inversely proportional to the colour depth, i.e. 24 may be faster than 16 ....

tms217 · Post by **tms217** » Tue May 11, 2004 6:05 am

Ill try It. 93 Notch, I'll get the information tonight. The laptop is at the other house.

tms217 · Post by **tms217** » Tue May 11, 2004 4:17 pm

93notch wrote:
tms217 wrote:I dont have another... I'll see if I can find someone that will let me use theirs...

Here are somemore #'s at WOT.. You can see an almost 1 full second it skips during it..

126.943
127.784
128.205
Which Strategy are you using with your Cobra? Can you send me a 4 bank copy of your stock binary??

with 130A8 I used RVAFA and when I tried to use the RVAFA on the 130A9 it did not work. However, the RVAF3 looks the same as the old RVAFA but it does not have any paylods. I did get the RVAF2 to work and seems to run fine with the payloads. Before and after the 130A9 I was having this problem. It was fine on the (i think it was) 130A7 but now when I try to log anything It skips. You should get the binary soon via email..

tms217 · Post by **tms217** » Tue May 11, 2004 4:27 pm

BTW.. Itried to change the color depth and res and nothing seems to help. What would happen if I went to Win 98 from XP? What if I got USB 2.0? I'll be logged on AOL as SilverKobra2001 if anyone wants to talk a bit tonight...

tms217 · Post by **tms217** » Wed May 12, 2004 5:03 am

Mike,

I got the data files last night and I have the RVAF3 working but it still drops logs... I'm at a loss... I dont know of anyone right near me that has a laptop I can borrow to test...

tms217 · Post by **tms217** » Wed May 12, 2004 4:11 pm

MIke,

Got the file Thanks. I have all of the correct scalers from what i had before but the data logging is still fritzy. Is there anything I can try, IE install win 98 instead? I need to get this fixed.

Terry

tms217 · Post by **tms217** » Wed May 12, 2004 5:35 pm

Here is something...

When I try to install BDE I get a "Error createing/opening registry key" Could this be my problem??????

93notch · Post by **93notch** » Wed May 12, 2004 11:45 pm

Tim,

Send me a zipped logfile and read your calibration back from the tweecer so it has the payload in it. Let me check and see wtf is up with this turd.

info@tweecer.com

tms217 · Post by **tms217** » Thu May 13, 2004 5:40 am

and read your calibration back from the tweecer so it has the payload in it

What do you need here? I can get you anything you need. I guess I dont know how to do this..

93notch · Post by **93notch** » Thu May 13, 2004 12:42 pm

Sorry. Read the TwEECer position that has the binary where you are trying to datalog from. Save it to a file and email it to me. When you read it from the TwEECer, it will have the payload in it and I can look at the file and make sure that the payload is being written correctly.

tms217 · Post by **tms217** » Thu May 13, 2004 1:49 pm

email sent..

tms217 · Post by **tms217** » Sun May 16, 2004 5:20 pm

Mike I just sent you a full 1/4 mile run and you can see more of the issues. You can see some of the logs are as few as 1-2 logs per second. Even at idle it skips so this is not just a WOT issue..

Terry

tms217 · Post by **tms217** » Tue Jun 22, 2004 2:33 pm

Mike,

We had tried to work out the issues I was having with my Tweecer skipping datalogs. I pulled it out and cleaned all of the contacts to try and find my problems. I wanted to see first off if I sent it back to you if you could see if it might be a possible hardware issue and if it is we can try to do something about it.

Second, I wanted to see if I could send my autologic chip with it to get the program of off it. Please let me know as soon as you can.

Thanks
Terry

tms217 · Post by **tms217** » Fri Jun 25, 2004 11:26 am

Update...

I took out the tweecer and installed it onto a 1989 5.0 with a A9M ECM. The datalogging works like a charm. Put it back onto my Cobra and it gets jumping around again. Is the tweecer data logging not compatible with the 2001 Cobra?

Terry

slowbra · Post by **slowbra** » Fri Jun 25, 2004 3:35 pm

I suspected it would work fine on another car since the chances of you and I both having identical computer/USB/connection problems was slim to none.

tms217 · Post by **tms217** » Tue Jun 29, 2004 5:38 am

Is there a plan to fix this for the 2001 Cobras?

Chris Mureen · Post by **Chris Mureen** » Tue Jun 29, 2004 12:16 pm

It isn't just 2001 Cobras. My 98 AOL3/CRAJ0 has always had the same problem.

Dale McPeters · Post by **Dale McPeters** » Tue Jun 29, 2004 1:13 pm

Chris Mureen wrote:It isn't just 2001 Cobras. My 98 AOL3/CRAJ0 has always had the same problem.

This would also be the same on '01 GT w/GIZ2 2 or 4 bank using the RVAFA strategy....with Alpha A9xx. This would be using a known "GOOD" TwEECer from my '03 Mach 1............

I can not get it to datalog anything but garbage.............

tms217 · Post by **tms217** » Wed Jun 30, 2004 1:50 pm

Does this mean that there will be a fix for this?

tms217 · Post by **tms217** » Fri Jul 02, 2004 4:45 pm

Is the silence a yes its being worked on or no its not?

Dale McPeters · Post by **Dale McPeters** » Tue Jul 06, 2004 8:18 am

tms217 wrote:Is the silence a yes its being worked on or no its not?

I can not answer this as I have not heard from Mike G. in a while. I have been very busy working on my own "stuff". Have you emailed Mike directly to see if he has come up with a fix yet?

I still could not get the '01 GT that I was "tinkering" with to datalog corrctly. I know that he was looking into this isssue but have not heard anything yet......

Dale

tms217 · Post by **tms217** » Tue Jul 06, 2004 4:22 pm

I got an email from him today... Sent him alittle info back.

Who is online