Moderators: EDS50, cgrey8, 2Shaker, Jon 94GT
-
David Claflin
- Tuning Addict
- Posts: 570
- Joined: Fri Jul 07, 2006 5:23 pm
Can we have a forum to move the spammer crap into??
It's annoying seeing the junk on here, IMHO
1990 LX/A9L/302, Ported RPM heads, Ported Holley SMII, 1 3/4 longtubes, 3"exhaust, T5, 3.73
1985 LTD LX, A9L, ported TW heads, ported Holley SMII,1 3/4 longtubes, 4.10, T5trans, mach 1 brakes.
1986 coupe, A9L, former FHP car, stock shortblock, TW 11R190heads, stock cam +4, VIC Jr EFI. 4-holeTB, Pro-M Duo, 2 slotmeters, 1 3/4 longtubes, 3" exhaust, T5Z, 4.88
1993 LX A3M, 347, 11R205 heads, Ported Holley SMII, 1 3/4 RCI headers, 3" exhaust, 4.10s
1985 LTD LX, A9L, ported TW heads, ported Holley SMII,1 3/4 longtubes, 4.10, T5trans, mach 1 brakes.
1986 coupe, A9L, former FHP car, stock shortblock, TW 11R190heads, stock cam +4, VIC Jr EFI. 4-holeTB, Pro-M Duo, 2 slotmeters, 1 3/4 longtubes, 3" exhaust, T5Z, 4.88
1993 LX A3M, 347, 11R205 heads, Ported Holley SMII, 1 3/4 RCI headers, 3" exhaust, 4.10s
- cgrey8
- Administrator
- Posts: 11304
- Joined: Fri Jun 24, 2005 5:54 am
- Location: Acworth, Ga (Metro Atlanta)
- Contact:
Would admin consider one of the regulars or "Tuning Addicts" to serve as moderator so they could do that?
...Always Somethin'
89 Ranger Supercab, 331 w/GT40p heads, ported Explorer lower, Crane Powermax 2020 cam, FMS Explorer (GT40p) headers, aftermarket T5 'Z-Spec', GUFB, Moates QuarterHorse tuned using BE&EA
Member V8-Ranger.com
89 Ranger Supercab, 331 w/GT40p heads, ported Explorer lower, Crane Powermax 2020 cam, FMS Explorer (GT40p) headers, aftermarket T5 'Z-Spec', GUFB, Moates QuarterHorse tuned using BE&EA
Member V8-Ranger.com
This is getting worse than my own home email. I'm curious though, why this forum has soo many? I frequent other forums and have not really seen any of this kind of BS.
I wish there was a way to Ekick them in the ballz.
I wish there was a way to Ekick them in the ballz.
91 GT, A9P, systemax II, 75mm tb, AFP, 75mm Pro M, 42#, Vortech S trim, GT40 crate 5.0, BBK catted X, flows, Tremec 3550, Pro 5.0, 3.27 gears. Tweecer RT, TunerPro.
- cgrey8
- Administrator
- Posts: 11304
- Joined: Fri Jun 24, 2005 5:54 am
- Location: Acworth, Ga (Metro Atlanta)
- Contact:
Like I said, the site needs a moderator that's a regular.
...Always Somethin'
89 Ranger Supercab, 331 w/GT40p heads, ported Explorer lower, Crane Powermax 2020 cam, FMS Explorer (GT40p) headers, aftermarket T5 'Z-Spec', GUFB, Moates QuarterHorse tuned using BE&EA
Member V8-Ranger.com
89 Ranger Supercab, 331 w/GT40p heads, ported Explorer lower, Crane Powermax 2020 cam, FMS Explorer (GT40p) headers, aftermarket T5 'Z-Spec', GUFB, Moates QuarterHorse tuned using BE&EA
Member V8-Ranger.com
I sent a note to Jon asking him to remove these and also asked if he would consider one of us as a moderator to help out. I'll let you know if I hear anything.
94 GT, CBAZA/J4J1, 347 (on a R302 block), F303 cam, Performer II Intake, 1.7 Crane RR's, 1 5/8 Shorties, 70MM BBK TB, C&L 85mm Tuner MAF, Pro-Charger D1SC, 60#'s, TKO 600. Runs 11:80's
This is ridiculous! Does anybody know how to get his attention? I think I'll try an E-mail to Mike Glover, even though it will probably be another exercise in futility. For some reason I have the impression that the two know each other quite well, or at least know how to get to one another.
94 GT, CBAZA/J4J1, 347 (on a R302 block), F303 cam, Performer II Intake, 1.7 Crane RR's, 1 5/8 Shorties, 70MM BBK TB, C&L 85mm Tuner MAF, Pro-Charger D1SC, 60#'s, TKO 600. Runs 11:80's
I'm tellin ya, if I EVER meet anyone in person who admits to spamming, I am fcking kicking them in the ballz.Cougar5.0 wrote:They should be earning a bloody lip IMHOJuiceSC wrote:Do these people make money doing this crap or what?
91 GT, A9P, systemax II, 75mm tb, AFP, 75mm Pro M, 42#, Vortech S trim, GT40 crate 5.0, BBK catted X, flows, Tremec 3550, Pro 5.0, 3.27 gears. Tweecer RT, TunerPro.
Holy CRAP, sorry guys, just started a new job and have been consumed with it....
I'm cleaning it all up right now, damnit, i cant take a break for even a couple weeks!
Whew! Sorry guys!
I'm cleaning it all up right now, damnit, i cant take a break for even a couple weeks!
Whew! Sorry guys!
:: Owner and operator of EECTuning.org ::
I don't know how many of you are seeing the SPAM, but we are getting creamed with it. I am in here 2-4 times a day and usually have to remove 2 or 3 of these each day. So bear with me, I will keep it cleaned up but there may be times when I haven't checked for a while, but no more than 24 hours.
94 GT, CBAZA/J4J1, 347 (on a R302 block), F303 cam, Performer II Intake, 1.7 Crane RR's, 1 5/8 Shorties, 70MM BBK TB, C&L 85mm Tuner MAF, Pro-Charger D1SC, 60#'s, TKO 600. Runs 11:80's
- cgrey8
- Administrator
- Posts: 11304
- Joined: Fri Jun 24, 2005 5:54 am
- Location: Acworth, Ga (Metro Atlanta)
- Contact:
Other phpBB forums have those bot-eliminator GIF files that give you a series of wacky numbers and letters that a computer couldn't easily identify but humans have a close chance of seeing. The person registering on the board has to be able to give the proper response and if they can't, they don't get registered. This stops automated registration attempts, but still doesn't stop the ones that actually are typing in those numbers. However since that was implemented over at V8-Ranger.com, I haven't seen spam there since and the moderator logs on maybe once a day if that.
I emailed him requesting details of what it took to implement so I can forward it onto Jon and 2Shaker. I don't know if it is freeware or not...
I emailed him requesting details of what it took to implement so I can forward it onto Jon and 2Shaker. I don't know if it is freeware or not...
...Always Somethin'
89 Ranger Supercab, 331 w/GT40p heads, ported Explorer lower, Crane Powermax 2020 cam, FMS Explorer (GT40p) headers, aftermarket T5 'Z-Spec', GUFB, Moates QuarterHorse tuned using BE&EA
Member V8-Ranger.com
89 Ranger Supercab, 331 w/GT40p heads, ported Explorer lower, Crane Powermax 2020 cam, FMS Explorer (GT40p) headers, aftermarket T5 'Z-Spec', GUFB, Moates QuarterHorse tuned using BE&EA
Member V8-Ranger.com
-
twinturbostang
- Tuning Addict
- Posts: 549
- Joined: Fri Oct 18, 2002 2:01 pm
- Location: Did somebody say boost?
- Contact:
I now have this feature enabled on my forum, and since then, I get very little spam posts. Every once and a while, one gets through. But like you said... that may be an actual person doing the registration. Before I had this enabled, it was starting to get out of hand. Well, at least for my small little corner of the internet. :)cgrey8 wrote:Other phpBB forums have those bot-eliminator GIF files that give you a series of wacky numbers and letters that a computer couldn't easily identify but humans have a close chance of seeing. The person registering on the board has to be able to give the proper response and if they can't, they don't get registered. This stops automated registration attempts, but still doesn't stop the ones that actually are typing in those numbers. However since that was implemented over at V8-Ranger.com, I haven't seen spam there since and the moderator logs on maybe once a day if that.
www.twinturbostang.com
'97 Cobra - VT billet stroker shortblock, LLX4, TwEECer RT v1.30A9
'91 coupe - Incon Twin Turbo (gone, but not forgotten)
'97 Cobra - VT billet stroker shortblock, LLX4, TwEECer RT v1.30A9
'91 coupe - Incon Twin Turbo (gone, but not forgotten)
- cgrey8
- Administrator
- Posts: 11304
- Joined: Fri Jun 24, 2005 5:54 am
- Location: Acworth, Ga (Metro Atlanta)
- Contact:
I've heard there are python scripts that people have written that actually identify the characters in those GIFs. I don't know what their success rate is, but if they can do it at all, that's impressive. I have a hard time making out some of those characters.
But I hear there are other neat ways you can "catch" the bots and that's by programming standard fields as invisible fields, but the bots will find them and attempt to put crap into them thinking they are needed like password fields. But in reality, your script is looking for info to be submitted in these fields and thus catches the bots. A person trying to register wouldn't see the hidden field and would use some other field you provide.
Kinda neat...
But I hear there are other neat ways you can "catch" the bots and that's by programming standard fields as invisible fields, but the bots will find them and attempt to put crap into them thinking they are needed like password fields. But in reality, your script is looking for info to be submitted in these fields and thus catches the bots. A person trying to register wouldn't see the hidden field and would use some other field you provide.
Kinda neat...
...Always Somethin'
89 Ranger Supercab, 331 w/GT40p heads, ported Explorer lower, Crane Powermax 2020 cam, FMS Explorer (GT40p) headers, aftermarket T5 'Z-Spec', GUFB, Moates QuarterHorse tuned using BE&EA
Member V8-Ranger.com
89 Ranger Supercab, 331 w/GT40p heads, ported Explorer lower, Crane Powermax 2020 cam, FMS Explorer (GT40p) headers, aftermarket T5 'Z-Spec', GUFB, Moates QuarterHorse tuned using BE&EA
Member V8-Ranger.com
-
twinturbostang
- Tuning Addict
- Posts: 549
- Joined: Fri Oct 18, 2002 2:01 pm
- Location: Did somebody say boost?
- Contact:
Clever! :)cgrey8 wrote:But I hear there are other neat ways you can "catch" the bots and that's by programming standard fields as invisible fields, but the bots will find them and attempt to put crap into them thinking they are needed like password fields. But in reality, your script is looking for info to be submitted in these fields and thus catches the bots. A person trying to register wouldn't see the hidden field and would use some other field you provide.
Kinda neat...
www.twinturbostang.com
'97 Cobra - VT billet stroker shortblock, LLX4, TwEECer RT v1.30A9
'91 coupe - Incon Twin Turbo (gone, but not forgotten)
'97 Cobra - VT billet stroker shortblock, LLX4, TwEECer RT v1.30A9
'91 coupe - Incon Twin Turbo (gone, but not forgotten)
Yep, I will look into it soon guys, hopefully tonight or tomorrow. It really depends on when I get some spare time...I am swamped with a bagillion other projects right now.
The idea about the hidden fields, great idea, I will see about implementing that in some manner...as well as looking into that script linked to also.
Sorry for the spam guys, should have something in place to help reduce it soon.
-Jon
The idea about the hidden fields, great idea, I will see about implementing that in some manner...as well as looking into that script linked to also.
Sorry for the spam guys, should have something in place to help reduce it soon.
-Jon
:: Owner and operator of EECTuning.org ::
Jon, where are you? I'm removing 10 -15 a day now.
I hate these spammer bastards. If I ever caught one my next place of residence would be jail, but then maybe the judge would sympathize having also been victim to this crap.
I hate these spammer bastards. If I ever caught one my next place of residence would be jail, but then maybe the judge would sympathize having also been victim to this crap.
94 GT, CBAZA/J4J1, 347 (on a R302 block), F303 cam, Performer II Intake, 1.7 Crane RR's, 1 5/8 Shorties, 70MM BBK TB, C&L 85mm Tuner MAF, Pro-Charger D1SC, 60#'s, TKO 600. Runs 11:80's
Who is online
Users browsing this forum: No registered users and 129 guests